Box Mod Vandy Vape Pulse BF Kit - Ultem - 8ml

The Pulse BF kit by Vandy Vape consists of the Pulse 24 BF atomizer and of Pulse BF mod with colorful transparent panels. The kit is entirely wireless with copper contacts. It features an intelligent fire button. The deck is gold plated and postless for a dual coil building and it has a tubular side direct airflow – Connection threading: 510 – battery: 18650 / 20700

40,71 ex. Tax

Availability: 7 - 10 Days

Add to Wishlist

Share

Share on facebook
Share on whatsapp
Share on google
Share on twitter

Description

The Pulse BF kit by Vandy Vape consists of the Pulse 24 BF atomizer and of Pulse BF mod with colorful transparent panels. The kit is entirely wireless with copper contacts. It features an intelligent fire button. The deck is gold plated and postless for a dual coil building and it has a tubular side direct airflow – Connection threading: 510 – battery: 18650 / 20700

Features:

Product type: Squonk kit

Color: Ultem

Material: Nylon and ABS

Atomizer material: Stainless steel

Connection Threading: 510

Drip tip: Yes

Drip tip replaceable: Yes

Coil replaceable: No

Coil Rebuildable: Yes

Adjustable voltage (VV): No

Adjustable Wattage (VW): No

Adjustable temperature: No

Capacity: 8ml

Size: 100mm x 50mm x 27mm

Battery type: 20700 or 18650

Battery NON included

Intelligent fire button

Postless gold plated deck

Magnetic panels

Liquid refill: Squeeze the bottom silicone bottle or remove the cap or the drip tip. Then slowly drip e-liquid on cotton. Finally put back the top on.

Battery charging: By taking out the cell and charge them through external charger.

Airflow control: Rotate the cap of the atomizer.

Head replacement: 1) Before starting make sure your hands are clean. 2) Take the head apart. 3) Installing the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base. 4) Positioning and cutting the exceeding ends of wire off. 5) Cutting a strip of cotton and make sure it’s not too much and not too less. 6) Inserting the cotton, and placing it in the middle. 7) Cutting the cotton at an angle and make sure it’s not too short and not too long. 8) Wet the coil with your e-liquid and adjust the cotton.
Warning: Coils must be checked for resistance before they are fired on a device, and re-checked periodically to ensure the resistance remains the same.

Contents:

1 x Pulse 24 BF mod

1 x Atomizer Pulse 24 BF RDA – Special edition

1 x 18650 battery adapter

Additional information

Weight 150 g

Reviews

There are no reviews yet.

Be the first to review “Box Mod Vandy Vape Pulse BF Kit – Ultem – 8ml”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest